View IX3120_9037059.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

i ntegrated c ircuits d ivision ds-IX3120-r04 www.ixysic.com 1 features ? 2.5a maximum peak output current ? 25kv/s minimum common mode rejection (cmr) at 1500v cm ? wide operating voltage range: 15v to 30v ? under voltage lockout with hysteresis ? 3750v rms input to output isolation ? wide temperature range: -40c to +100c applications ? isolated igbt/mosfet gate drive ? switch mode power supplies ? industrial inverters ? motor drivers description the IX3120 gate driver includes an input infrared led that is optically coupled to a power output stage. the power output stage is capable of sourcing or sinking 2a of peak current, which is ideal for driving igbts and mosfets in the mid-power range. the gate driver optocoupler with its low input led current, high output peak current, and high noise immunity (25kv/ ? s) is ideally suited for use in motor control and inverter applications. the IX3120 is provided in an 8-pin dip package and an 8-pin surface mount package. approvals ? ul recognized component: file e76270 ? iec/en/din en 60747-5-5 (?ge? versions) ordering information figure 1. IX3120 block diagram part description IX3120g 8-pin dip package (50/tube) IX3120gs 8-pin surface mount (50/tube) IX3120gstr 8-pin surface mount tape & reel (1000/reel) IX3120ge 8-pin dip package (50/tube), iec 60747-5-5 option IX3120ges 8-pin surface mount (50/tube), iec 60747-5-5 option IX3120gestr 8-pin surface mount tape & reel (1000/reel), iec 60747-5-5 option note: a 0.1f b ypass capacitor m ust be connected betw een pins 5 and 8. truth table led off on on on v cc -v ee positi v e going (i.e. t u rn-on) v cc -v ee negativ e going (i.e. t u rn-off) v o transition high lo w lo w 0v - 30v 0v - 30v 0v - 11v 0v - 9.5v 11v - 13.5v 9.5v - 12v 13.5v - 30v 12v - 30v anode cathode v cc v o v ee n/c n/c v o 2 3 1 4 7 6 8 5 IX3120 2.5a output current gate driver optocoupler
i ntegrated c ircuits d ivision 2 www.ixysic.com r04 IX3120 1. specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 package pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 pin description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3 absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.4 recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.5 electrical specifications (dc). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.6 switching characteristics (ac) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.7 safety and insulation ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. performance data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4. manufacturing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.1 moisture sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.2 esd sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.3 soldering profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.4 board wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.5 package mechanical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.5.1 IX3120g & IX3120ge 8-pin dip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.5.2 IX3120gs & IX3120ges 8-pin surface mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.5.3 IX3120gstr & IX3120gestr tape & reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.6 device branding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
i ntegrated c ircuits d ivision IX3120 r04 www.ixysic.com 3 1. specifications 1.1 package pinout 1.2 pin description 1.3 absolute maximum ratings absolute maximum ratings are at 25c. notes: 1 maximum pulse width=10 ? s, maximum duty cycle=0.2%. 2 derate linearly 1.33mw/c 3 derate linearly 7.5mw/c absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. 2 3 8 5 6 7 anode cathode v cc v o v ee n/c n/c 1 4 v o pin# name description 1 n/c no connection 2 anode anode of input led 3 cathode cathode of input led 4 n/c no connection 5 v ee negative supply voltage 6 v o gate drive output 7 v o gate drive output 8 v cc positive supply voltage parameter symbol limit units supply voltage v cc - v ee 0 to 35 v output voltage v o(peak) 0 to v cc v ?high? peak output current 1 i oh(peak) - 2.5 a ?low? peak output current 1 i ol(peak) 2.5 a reverse input voltage v r 5v average input current i f(avg) 20 ma peak transient input current (<1 ? s pulse width, 300pps) i f(tran) 1a input power dissipation 2 p in 50 mw total power dissipation 3 p t 800 mw isolation voltage, input to output v io 3750 v rms operating temperature t a -40 to +100 c storage temperature t stg -55 to +125 c
i ntegrated c ircuits d ivision 4 www.ixysic.com r04 IX3120 1.4 recommended operating conditions 1.5 electrical specifications (dc) over recommended operating conditions unless other wise specified. typical values are at t a =25c,v cc =30v, and v ee =ground. 1 maximum pulse width = 50 ? s, maximum duty cycle = 0.5%. 2 maximum pulse width = 10 ? s, maximum duty cycle = 0.2%. see ?test circuits? on page 9 for more information. parameter symbol min max units power supply voltage v cc - v ee 15 30 v input current (on) i f(on) 71 6m a input voltage (off) v f(off) -3.6 0.8 v operating temperature t a -40 100 c parameter conditions symbol min typ max units high level output current v o =(v cc -4v) 1 i oh - 0.5 -1.5 - a v o =(v cc -15v) 2 - 2 - - low level output current v o =(v ee +2.5v) 1 i ol 0.5 1.4 - a v o =(v ee +15v) 2 2-- high level output voltage i o =-100ma v oh v cc - 4 v cc - 3 -v low level output voltage i o =100ma v ol -0.10.5v high level supply current output open, i f =7 to 16ma i cch -4.56 ma low level supply current output open, v f =- 3 to +0.8v i ccl -2.66 threshold input current, low-to-high i o =0ma, v o >5v i flh -0.75ma threshold input voltage, high-to-low - v fhl 0.8 - - v input forward voltage i f =10ma v f 1 1.24 1.5 v temperature coefficient of forward voltage i f =10ma ? v f / ? t a --1.6-mv/c input reverse breakdown voltage i r =10 ? abv r 5-- v input capacitance f=1mhz, v f =0v c in -60- pf uvlo threshold v o >5v, i f =10ma v uvlo+ 11 12.3 13.5 v v uvlo- 9.5 10.7 12 uvlo hysteresis v o >5v, i f =10ma uvlo hys -1.6- v
i ntegrated c ircuits d ivision IX3120 r04 www.ixysic.com 5 1.6 switching characteristics (ac) over recommended operating conditions, unless otherwise specified. 1 the difference between t phl and t plh of any two IX3120 devices operating under the same conditions and temperature. figure 2. timing waveforms parameter conditions symbol min typ max units propagation delay time to high output level r g =10 ? , c g =10nf f=10khz, duty cycle=50% t plh 0.1 0.3 0.5 ? s propagation delay time to low output level t phl 0.1 0.3 0.5 pulse width distortion pwd |t phl -t plh | --0.3 propagation delay difference between any two parts 1 pdd (t phl -t plh ) -0.35 - 0.35 rise time t r -0.1- fall time t f -0.1- uvlo turn-on delay v o >5v, i f =10ma t uvlo(on) -0.8- ? s uvlo turn-off delay v o <5v, i f =10ma t uvlo(off) -0.6- output high level common mode transient immunity i f =10 to 16ma, v cm =1500v, v cc =30v, t a =25c |cm h | 25 35 - kv/ ? s output low level common mode transient immunity v f =0v, v cm =1500v, v cc =30v, t a =25c |cm l | 25 35 - i f v out t plh t phl 90% 50% 10% t r t f
i ntegrated c ircuits d ivision 6 www.ixysic.com r04 IX3120 1.7 safety and insulation ratings as per iec 60747-5-5. parameter conditions symbol rating units minimum external air gap (clearance) mea sured from input terminals to output terminals, shortest distance through air. l(101) 7.62 mm minimum external tracking (creepage) measured from input terminals to output terminals, shortest distance path along body. l(102) 7.50 mm distance through insulation (internal clearance) insulation thickness between emitter and detector -0.48mm tracking resistance (comparative tracking index) din iec 60112/vde 0303 part 1 cti >175 v isolation group din vde 0110, 1/89, table 1 material group -iiia - installation classification di n vde 0110/1.89, table 1 rated mains voltage < 300v rms -i-iv - din vde 0110/1.89, table 1 rated mains voltage < 1000v rms - i-iii - climatic classification - - 55/100/21 - input to output test voltage iec en 60747-5-5 method b, v iorm x 1.875 = v pr , 100% production test with tm = 1 sec., partial discharge < 5pc v pr 3750 v peak iec en 60747-5-5 method a, v iorm x 1.6 = v pr , type and sample test with tm = 10 sec., partial discharge < 5pc 3200 insulation resistance t s , v io = 500v dc r s 10 9 ? pollution degree din vde 0109 - 2 - highest allowable over-voltage transient over-voltage v iotm 6000 v p maximum working insulation voltage recurring voltage v iorm 2000 v p partial discharge test voltage din en 60747-5-5 method b v pr 3750 v p isolation test voltage - v iso 3750 v rms input-output momentary withstand voltage rh < 50%, t = 1 min, t a = 25c v iso 3750 v rms resistance (input-output), typical v i-o = 500v dc r i-o 10 12 ? capacitance (input-output), typical f = 1 mhz c i-o 0.6 pf
i ntegrated c ircuits d ivision IX3120 r04 www.ixysic.com 7 2. performance data temperature (oc) -40 -20 0 20 40 60 8 0 100 v oh - v cc (v) -0.20 -0.18 -0.16 -0.14 -0.12 -0.10 v oh vs. temperature (i f =7ma, i out =-100ma, v cc =15v, v ee =0v) temperature (oc) -40 -20 0 20 40 60 8 0 100 volta g e output low (v) 0.10 0.12 0.14 0.16 0.18 0.20 0.22 v ol vs. temperature (i f =0ma, i out =100ma, v cc =15v, v ee =0v) temperature (oc) -40 -20 0 20 40 60 8 0 100 output high current (a) 1.0 1.5 2.0 2.5 3.0 output hig h current vs. temperature (v cc =15v, v ee =0v, i f =7ma, v out =v cc -4v) i oh (a) 0.0 0.5 1.0 1.5 2.0 2.5 v oh - v cc (v) -10 -8 -6 -4 -2 0 v oh vs. i oh (i f =7ma, v cc =15v, v ee =0v) -40oc 25oc 100oc temperature (oc) -40 -20 0 20 40 60 8 0 100 output low current (a) 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 output low current vs. temperature (v cc =15v, v ee =0v, v out =2.5v) (v f(off) =-3.0 to 0.8v) i ol (a) 0.0 0.5 1.0 1.5 2.0 2.5 v ol (v) 0 2 4 6 8 10 12 v ol vs. i ol (v cc =15v, v ee =0v, v f(off) =-3.0 to 0.8v) 100oc 25oc -40oc temperature (oc) -40 -20 0 20 40 60 8 0 100 i cc (ma) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 i cc vs. temperature (v cc =30v, v ee =0v, output=open) i cch : i f =10ma i ccl : i f =0ma supply volta g e (v) 15 20 25 30 i cc (ma) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 i cc vs. v cc (i f =10ma, v ee =0v, t a =25oc) i cch i ccl temperature (oc) -40 -20 0 20 40 60 8 0 100 forward current (ma) 0.60 0.62 0.64 0.66 0.68 0.70 0.72 0.74 i flh vs. temperature (v cc =30v, v ee =0v, output=open) led forward volta g e (v) 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 led forward current (ma) 0 20 40 60 80 100 led forward current vs. forward volta g e (t a =25oc) v cc - supply volta g e (v) 15 20 25 30 propa g ation delay (ns) 60 80 100 120 140 160 propa g ation delay vs. v cc (i f =10ma, r g =10, c g =10nf) (duty cycle=50%, f=10khz, t a =25oc) t phl t plh t phl t plh r g () 10 15 20 25 30 35 40 45 50 propa g ation delay (ns) 60 80 100 120 140 160 propa g ation delay vs. r g (i f =10ma, v cc =30v, v ee =0v, c g =10nf) (duty cycle=50%, f=10khz, t a =25oc)
i ntegrated c ircuits d ivision 8 www.ixysic.com r04 IX3120 performance data (cont.) temperature (oc) -40 -20 0 20 40 60 8 0 100 propa g ation delay (ns) 60 80 100 120 140 160 propa g ation delay vs. temperature (i f =10ma, v cc =30v, v ee =0v, r g =10) (c g =10nf, duty cycle=50%, f=10khz) t plh t phl i f - forward led current (ma) 012345 0 5 10 15 transfer characteristics 20 25 30 35 v o - output volta g e (v) t phl t plh c g (nf) 0204060 8 0 100 propa g ation delay (ns) 60 80 100 120 140 160 propa g ation delay vs. c g (i f =10ma, v cc =30v, v ee =0v, r g =10) (duty cycle=50%, f=10khz, t a =25oc) t phl t plh i f (ma) 6 8 10 12 14 16 propa g ation delay (ns) 60 80 100 120 140 160 propa g ation delay vs. i f (v cc =30v, v ee =0v, r g =10, c g =10nf) (duty cycle=50%, f=10khz, t a =25oc)
i ntegrated c ircuits d ivision IX3120 r04 www.ixysic.com 9 3. test circuits t plh , t phl , t r , t f test circ uit 2 3 1 4 7 6 8 5 i f =7 to 16ma 0.1f v cc =15 to 30v + - v o r g 10 c g 10nf 500 + - 10khz 50% duty cycle v oh test circ uit i ol test circ uit v ol test circ uit i flh test circ uit uv lo test circuit i oh test circ uit 2 3 1 4 7 6 8 5 i f =7 to 16ma 0.1f v cc =15 to 30v + - + - 4v i oh 2 3 1 4 7 6 8 5 0.1f v cc =15 to 30v + - i ol + - 2.5v 2 3 1 4 7 6 8 5 i f =7 to 16ma 0.1f v cc =15 to 30v + - v oh 100ma 2 3 1 4 7 6 8 5 0.1f v cc =15 to 30v + - v ol 100ma 2 3 1 4 7 6 8 5 i f =10ma 0.1f v cc + - v o >5v 2 3 1 4 7 6 8 5 0.1f v cc =15 to 30v + - v o >5v i f
i ntegrated c ircuits d ivision 10 www.ixysic.com r04 IX3120 4. manufacturing information 4.1 moisture sensitivity all plastic encapsulated semiconductor packages are susc eptible to moisture ingression. ixys integrated circuits division clas sified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as establ ished by the listed specificati ons could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . 4.2 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . 4.3 soldering profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. 4.4 board wash ixys integrated circuits division recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since ixys integrated ci rcuits division employs the us e of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake may be necessary if a wash is used after solder reflow processes. chlorine-based or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ul trasonic energy should not be used. device moisture sensitivity level (msl) rating IX3120g / IX3120gs / IX3120ge / IX3120ges msl 1 device maximum temperature x time maximum reflow cycles IX3120g / IX3120gs / IX3120ge / IX3120ges 250c for 30 seconds 3
i ntegrated c ircuits d ivision IX3120 r04 www.ixysic.com 11 4.5 package mechanical dimensions 4.5.1 IX3120g & IX3120ge 8-pin dip 4.5.2 IX3120gs & IX3120ges 8-pin surface mount dimensions mm (inches) pcb hole pattern 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 9.144 0.508 (0.360 0.020) 0.457 0.076 (0.018 0.003) 9.652 0.381 (0.380 0.015) 7.239 typ. (0.285) 7.620 0.254 (0.300 0.010) 4.064 typ (0.160) 0.813 0.102 (0.032 0.004) 8-0.800 dia. (8-0.031 dia.) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) pin 1 0.254 0.0127 (0.010 0.0005) dimensions mm (inches) pcb land pattern 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 6.350 0.127 (0.250 0.005) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) 0.813 0.102 (0.032 0.004) 4.445 0.127 (0.175 0.005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 0.254 0.0127 (0.010 0.0005) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) pin 1
i ntegrated c ircuits d ivision 12 www.ixysic.com r04 IX3120 4.5.3 IX3120gstr & IX3120gestr tape & reel 4.6 device branding dimensions mm (inches) user direction of feed notes: 1. dimensions carry tolerances of eia standard 4 81-2 2. tape complies w ith all ? n otes? for constant dimensions listed on page 5 of eia-481-2 embossment emb ossed carrier top co v er tape thickness 0.102 max. (0.004 max.) 330.2 dia. (13.00 dia.) k 1 =4.20 (0.165) 0 k =4.90 (0.193) p=12.00 (0.472) w=16.00 (0.63) bo=10.30 (0.406) ao=10.30 (0.406) IX3120g yyww@kkkkk IX3120ge yyww@kkkkk IX3120g IX3120gs IX3120ge IX3120ges * yyww@kkkkk yyww = date code (year/year/w eek/w eek) @kkkkk = sequentially assigned kit code with assemb ly location identifier ** for additional information please visit our website at: www.ixysic.com ixys integrated circuits division makes no representations or warranties with respect to the accuracy or completeness of the co ntents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity ar e expressed or implied. except as set forth in ixys integrated circuits division?s standard terms and conditions of sale, i xys integrated circuits division assumes no liability whatsoever, a nd disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringem ent of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of ixys integrated circuits division?s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. ixys integrated circuits division reserves the right to discontinue or make changes to its pr oducts at any time without notice. specification: ds-IX3120-r04 ?copyright 2014, ixys integrated circuits division all rights reserved. printed in usa. 9/26/2014

▲Up To Search▲

Price & Availability of IX3120

	To Download IX3120 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .